Amel Kirk
Sailboat
35′ 2″
Monohull
Since 1971
Overview
- Builder
- Amel
- Model
- Kirk
- Type
- Sailboat
- Category
- Monohull
- Built
- 1971–1980
- Designer
- Henri Amel
- Hull material
- Hull and deck: GRP (glass reinforced polyester)
- Rig
- Sloop Marconi masthead
Dimensions
- Length overall
- 35′ 2″ (10.72 m)
- Waterline length
- 28′ 2″ (8.59 m)
- Beam
- 9′ 11″ (3.02 m)
- Draft
- 5′ 4″ (1.62 m)
- Displacement
- 11,023 lb (5,000 kg)
- Ballast
- 4,255 lb (1,930 kg)
Power and tanks
- Engine
- 1 inboard engine
- Power
- 15–25 hp
Sails and rig
- Sail area
- 570 sq ft (53.0 m²)
Accommodation
- Cabins
- 2
- Berths
- 6
- Heads
- 1
Design ratios
- Sail area / displacement
- 18.4
- Displacement / length
- 220
- Ballast ratio
- 39%
- Capsize screening
- 1.78
Power from the sails for the boat's weight. Under 16 is modest, 16–20 a typical cruiser, over 20 lively.
How heavy the boat is for its waterline. Under 200 is light, 200–300 moderate, over 300 heavy.
Share of the weight that is ballast. Higher generally means stiffer in a breeze.
Under 2 is generally considered better for offshore use.
More details
- Appendages
- Keel : L-shaped keel (with bulb)
- Ballast ratio
- 39 %
- Ballast type
- Cast iron
- Cockpit
- Center cockpit
- Construction
- Hull and deck: GRP (glass reinforced polyester)
- Country
- France
- Former French navigation category
- 1
- French customs tonnage
- 9.09 Tx
- Genoa area
- 357 ft²
- Helm
- Single tiller
- IOR rating
- 25.4
- Jib area
- 184 ft²
- Mast configuration
- Deck stepped mast
- Maximum transverse section
- 17 ft²
- Number of levels of spreaders
- 1
- Rigging type
- Sloop Marconi masthead
- Rotating spars
- No
- Rudder
- Single semi-spade rudder
- Spars construction
- Aluminum spars
- Spreaders angle
- 0 °
- Standard public price ex. VAT (indicative only)
- N/A €
- Standing rigging
- 1x19 strand wire continuous
- Stormjib area
- 43 ft²
- Symmetric spinnaker area
- 775 ft²
Data from boat-specs.com. Check details with the builder before relying on them.