Hallberg-Rassy 94 Kutter
Sailboat
30′ 10″
Monohull
Since 1981
Overview
- Builder
- Hallberg-Rassy
- Model
- 94 Kutter
- Type
- Sailboat
- Category
- Monohull
- Built
- 1981–1994
- Designer
- Olle Enderlein & Christoph Rassy
- Hull material
- GRP (glass reinforced polyester): - Hull: Single skin fiberg
- Rig
- Sloop Marconi masthead
Dimensions
- Length overall
- 30′ 10″ (9.40 m)
- Beam
- 10′ 8″ (3.25 m)
- Draft
- 3′ 10″ (1.17 m)
- Displacement
- 11,464 lb (5,200 kg)
- Ballast
- 3,968 lb (1,800 kg)
Power and tanks
- Engine
- 1 inboard engine
- Power
- 43 hp
- Fuel
- 40 gal (151 L)
Sails and rig
- Sail area
- 366 sq ft (34.0 m²)
Accommodation
- Cabins
- 1
- Berths
- 2
- Heads
- 1
Design ratios
- Sail area / displacement
- 11.5
- Ballast ratio
- 35%
- Capsize screening
- 1.89
Power from the sails for the boat's weight. Under 16 is modest, 16–20 a typical cruiser, over 20 lively.
Share of the weight that is ballast. Higher generally means stiffer in a breeze.
Under 2 is generally considered better for offshore use.
More details
- Appendages
- Keel : full keel
- Ballast ratio
- 35 %
- Ballast type
- Steel incapsulated in deep GRP bilge
- Cockpit
- Closed aft cockpit
- Construction
- GRP (glass reinforced polyester): - Hull: Single skin fiberglass polyester - Deck: Sandwich foam fiberglass polyester
- Country
- Sweden
- Fridge/ice-box capacity
- 18.5 gal
- Genoa area
- 205 ft²
- Helm
- Single tiller (helm wheel in option)
- Mast configuration
- Deck stepped mast
- Number of levels of spreaders
- 1
- Rigging type
- Sloop Marconi masthead
- Rotating spars
- No
- Rudder
- Single rudder on skeg
- Spars construction
- Aluminum spars
- Spreaders angle
- 0 °
- Standard public price ex. VAT (indicative only)
- N/A €
- Standing rigging
- 1x19 strand wire continuous
- Trailerable
- No
- Unsinkable
- No
Data from boat-specs.com. Check details with the builder before relying on them.