Nautor's Swan Swan 411
Sailboat
40′ 10″
Monohull
Since 1977
Overview
- Builder
- Nautor's Swan
- Model
- Swan 411
- Type
- Sailboat
- Category
- Monohull
- Built
- 1977–1979
- Designer
- Sparkman & Stephens
- Hull material
- GRP (glass reinforced polyester): - Hull: Single skin fiberg
- Rig
- Sloop Marconi masthead
Dimensions
- Length overall
- 40′ 10″ (12.44 m)
- Waterline length
- 33′ 7″ (10.24 m)
- Beam
- 11′ 11″ (3.63 m)
- Draft
- 7′ 4″ (2.23 m)
- Displacement
- 23,810 lb (10,800 kg)
- Ballast
- 11,464 lb (5,200 kg)
Power and tanks
- Engine
- 1 inboard engine
- Power
- 37–47 hp
- Fuel
- 34 gal (129 L)
Sails and rig
- Sail area
- 1,131 sq ft (105.1 m²)
Accommodation
- Cabins
- 2
- Berths
- 7
- Heads
- 1
Design ratios
- Sail area / displacement
- 21.9
- Displacement / length
- 281
- Ballast ratio
- 48%
- Capsize screening
- 1.66
Power from the sails for the boat's weight. Under 16 is modest, 16–20 a typical cruiser, over 20 lively.
How heavy the boat is for its waterline. Under 200 is light, 200–300 moderate, over 300 heavy.
Share of the weight that is ballast. Higher generally means stiffer in a breeze.
Under 2 is generally considered better for offshore use.
More details
- Appendages
- Keel : fin without bulb
- Ballast ratio
- 48 %
- Ballast type
- Lead
- Cockpit
- Closed aft cockpit
- Construction
- GRP (glass reinforced polyester): - Hull: Single skin fiberglass polyester - Deck: Sandwich fiberglass polyester
- Country
- Finland
- Fridge/ice-box capacity
- 37 gal
- Genoa area
- 776 ft²
- Helm
- Single helm wheel
- Mast configuration
- Keel stepped mast
- Number of levels of spreaders
- 2
- Prismatic coefficient
- 0.55
- Rigging type
- Sloop Marconi masthead
- Rotating spars
- No
- Rudder
- Single rudder on skeg
- Spars construction
- Aluminum spars
- Spreaders angle
- 0 °
- Standard public price ex. VAT (indicative only)
- N/A €
- Standing rigging
- Single-strand (ROD) discontinuous
- Symmetric spinnaker area
- 1862 ft²
- Trailerable
- No
- Unsinkable
- No
- Wetted area
- 452 ft²
Data from boat-specs.com. Check details with the builder before relying on them.