ADH Inotec Diam 3
Sailboat
18′ 1″
Catamaran
Since 2003
Overview
- Builder
- ADH Inotec
- Model
- Diam 3
- Type
- Sailboat
- Category
- Catamaran
- Built
- 2003–2007
- Designer
- Bertrand Desjoyeaux
- Hull material
- GRP (glass reinforced polyester): - Hull: Sandwich foam fibe
- Rig
- Sloop Marconi (square top mainsail) fractional
Dimensions
- Length overall
- 18′ 1″ (5.51 m)
- Beam
- 8′ 6″ (2.59 m)
- Draft
- 3′ 1″ (0.94 m)
- Displacement
- 397 lb (180 kg)
Power and tanks
- Engine
- No engine
Sails and rig
- Sail area
- 228 sq ft (21.2 m²)
Design ratios
- Sail area / displacement
- 67.5
- Capsize screening
- 4.63
Power from the sails for the boat's weight. Under 16 is modest, 16–20 a typical cruiser, over 20 lively.
Under 2 is generally considered better for offshore use.
More details
- Appendages
- Centerboard : twin daggerboards
- Asymmetric spinnaker area
- 226 ft²
- Cockpit
- No cockpit
- Construction
- GRP (glass reinforced polyester): - Hull: Sandwich foam fiberglass polyester - Deck: Sandwich foam fiberglass polyester
- Country
- France
- Crew
- 2
- EC design category
- C
- Helm
- Single tiller
- Jib area
- 45 ft²
- Mast configuration
- Fore beam stepped mast
- Number of levels of spreaders
- 1
- PY (Portsmouth Yardstick) rating
- 693
- Rigging type
- Sloop Marconi (square top mainsail) fractional
- Rotating spars
- Yes
- Rudder
- Twin semi-spade rudders
- Sailboat collection
- F18
- Spars construction
- Aluminum spars
- Spreaders angle
- Swept-back (diamond)
- Standard public price ex. VAT (indicative only)
- N/A €
- Standing rigging
- Continuous
- Trailerable
- Yes
- Trapezes
- 2 set(s)
- Unsinkable
- No
Data from boat-specs.com. Check details with the builder before relying on them.