Gibert Marine Gib'Sea 264
Sailboat
26′ 2″
Monohull
Since 1995
Overview
- Builder
- Gibert Marine
- Model
- Gib'Sea 264
- Type
- Sailboat
- Category
- Monohull
- Built
- 1995–1996
- Designer
- Joubert Nivelt Design
- Hull material
- GRP (glass reinforced polyester): - Hull: Single skin fiberg
- Rig
- Sloop Marconi 9/10
Dimensions
- Length overall
- 26′ 2″ (7.98 m)
- Waterline length
- 23′ 1″ (7.03 m)
- Beam
- 9′ 8″ (2.95 m)
- Draft
- 6′ 8″ (2.03 m)
- Draft, board or keel up
- 2′ 7″ (0.79 m)
- Displacement
- 4,189 lb (1,900 kg)
- Ballast
- 1,764 lb (800 kg)
Power and tanks
- Engine
- 1 outboard or inboard engine
- Power
- 9 hp
- Fuel
- 16 gal (61 L)
Sails and rig
- Sail area
- 393 sq ft (36.5 m²)
Accommodation
- Cabins
- 1
- Berths
- 2
- Heads
- 1
Design ratios
- Sail area / displacement
- 24.2
- Displacement / length
- 152
- Ballast ratio
- 42%
- Capsize screening
- 2.40
Power from the sails for the boat's weight. Under 16 is modest, 16–20 a typical cruiser, over 20 lively.
How heavy the boat is for its waterline. Under 200 is light, 200–300 moderate, over 300 heavy.
Share of the weight that is ballast. Higher generally means stiffer in a breeze.
Under 2 is generally considered better for offshore use.
More details
- Appendages
- Lifting keel : swing keel
- Ballast ratio
- 42 %
- Ballast type
- Cast iron
- Cockpit
- Closed aft cockpit
- Construction
- GRP (glass reinforced polyester): - Hull: Single skin fiberglass polyester - Deck: Sandwich fiberglass polyester
- Country
- France
- Former French navigation category
- 2
- Fridge/ice-box capacity
- 14.5 gal
- Genoa area
- 151 ft²
- Helm
- Single tiller
- Mast configuration
- Deck stepped mast
- Number of levels of spreaders
- 1
- Rigging type
- Sloop Marconi 9/10
- Rotating spars
- No
- Rudder
- Single transom hung rudder
- Spars construction
- Aluminum spars
- Spreaders angle
- Swept-back
- Standard public price ex. VAT (indicative only)
- N/A €
- Standing rigging
- 1x19 strand wire continuous
- Trailerable
- No
- Unsinkable
- No
Data from boat-specs.com. Check details with the builder before relying on them.
More from Gibert Marine
Gib'Sea 80 Plus Fin keelSailboat · 1978
25′ 11″
Gib'Sea 262 Deep draftSailboat · 1989
25′ 4″
Gib'sea 84 Fin keelSailboat · 1983
27′ 7″
Gib'Sea 302 Deep draftSailboat · 1992
29′ 5″
Gib'sea 92 Deep draftSailboat · 1985
31′ 2″
Gib'Sea 96 Deep draftSailboat · 1983
33′ 1″
Gib'Sea 105 Plus StandardSailboat · 1980
34′ 4″
Gib'Sea 372 Deep draftSailboat · 1987
37′ 7″