Etap 30 Deep draft
Sailboat
29′ 8″
Monohull
Since 1984
Overview
- Builder
- Etap
- Model
- 30 Deep draft
- Type
- Sailboat
- Category
- Monohull
- Built
- 1984–1992
- Designer
- Jac de Ridder Yacht Design
- Hull material
- GRP (glass reinforced polyester): Sandwich foam fiberglass p
- Rig
- Sloop Marconi 7/8
Dimensions
- Length overall
- 29′ 8″ (9.04 m)
- Waterline length
- 25′ 11″ (7.90 m)
- Beam
- 10′ 4″ (3.15 m)
- Draft
- 5′ 11″ (1.80 m)
- Displacement
- 8,025 lb (3,640 kg)
- Ballast
- 2,921 lb (1,325 kg)
Power and tanks
- Engine
- 1 inboard engine
- Power
- 18 hp
- Fuel
- 13 gal (49 L)
Sails and rig
- Sail area
- 549 sq ft (51.0 m²)
Accommodation
- Cabins
- 1
- Berths
- 6
- Heads
- 1
Design ratios
- Sail area / displacement
- 21.9
- Displacement / length
- 206
- Ballast ratio
- 36%
- Capsize screening
- 2.06
Power from the sails for the boat's weight. Under 16 is modest, 16–20 a typical cruiser, over 20 lively.
How heavy the boat is for its waterline. Under 200 is light, 200–300 moderate, over 300 heavy.
Share of the weight that is ballast. Higher generally means stiffer in a breeze.
Under 2 is generally considered better for offshore use.
More details
- Appendages
- Keel : fin without bulb
- Ballast ratio
- 36 %
- Ballast type
- Cast iron
- Cockpit
- Closed aft cockpit
- Construction
- GRP (glass reinforced polyester): Sandwich foam fiberglass polyester
- Country
- Belgium
- Former French navigation category
- 2
- Fridge/ice-box capacity
- 11.4 gal
- Genoa area
- 289 ft²
- HN (French rating)
- 17.0
- Helm
- Single tiller
- Mast configuration
- Deck stepped mast
- Number of levels of spreaders
- 1
- Rigging type
- Sloop Marconi 7/8
- Righting moment @ 1°
- 452 lb.ft
- Rotating spars
- No
- Rudder
- Single semi-spade rudder
- Spars construction
- Aluminum spars
- Spreaders angle
- Swept-back
- Standard public price ex. VAT (indicative only)
- N/A €
- Standing rigging
- 1x19 strand wire continuous
- Symmetric spinnaker area
- 593 ft²
- Trailerable
- No
- Unsinkable
- Yes
Data from boat-specs.com. Check details with the builder before relying on them.