Etap 23iL Lifting keel

Sailboat 25′ 6″ Monohull Since 1995

Overview

Builder
Etap
Model
23iL Lifting keel
Type
Sailboat
Category
Monohull
Built
1995–1999
Designer
Jac de Ridder Yacht Design
Hull material
GRP (glass reinforced polyester): Sandwich foam fiberglass p
Rig
Sloop Marconi 7/8

Dimensions

Length overall
25′ 6″ (7.77 m)
Waterline length
20′ 4″ (6.20 m)
Beam
8′ 2″ (2.49 m)
Draft
4′ 10″ (1.47 m)
Draft, board or keel up
2′ 4″ (0.71 m)
Displacement
3,417 lb (1,550 kg)
Ballast
1,036 lb (470 kg)

Power and tanks

Engine
1 outboard engine
Power
6–9 hp

Sails and rig

Sail area
311 sq ft (28.9 m²)

Accommodation

Cabins
1
Berths
4

Design ratios

Sail area / displacement
21.9

Power from the sails for the boat's weight. Under 16 is modest, 16–20 a typical cruiser, over 20 lively.

Displacement / length
182

How heavy the boat is for its waterline. Under 200 is light, 200–300 moderate, over 300 heavy.

Ballast ratio
30%

Share of the weight that is ballast. Higher generally means stiffer in a breeze.

Capsize screening
2.17

Under 2 is generally considered better for offshore use.

More details

Appendages
Lifting keel : retractable L-shaped keel (with bulb)
Asymmetric spinnaker area
295 ft²
Ballast ratio
30 %
Ballast type
Cast iron
Cockpit
Closed aft cockpit
Construction
GRP (glass reinforced polyester): Sandwich foam fiberglass polyester
Country
Belgium
Former French navigation category
3
French customs tonnage
3.99 Tx
Genoa area
160 ft²
HN (French rating)
7.5
Helm
Single tiller
IOR rating
16.5
Jib area
62 ft²
Mast configuration
Deck stepped mast
Number of levels of spreaders
1
Rigging type
Sloop Marconi 7/8
Rotating spars
No
Rudder
Single transom hung rudder
Solent area
110 ft²
Spars construction
Aluminum spars
Spreaders angle
Swept-back
Standard public price ex. VAT (indicative only)
N/A €
Standing rigging
1x19 strand wire continuous

Data from boat-specs.com. Check details with the builder before relying on them.

More from Etap